State of the Art Equipment for Water Damages
SERVPRO knows that staying on the cutting edge of technology in our industry will help our customers the most. That's why we add new equipment to our inventory on a regular basis. We are proud to be able to offer the best to our customers.
You may be wondering why this is important. Check out this information found on aboveboardchamber.com:
Many homeowners feel that if the water is removed, the work of water damage cleanup is done. This is because it is difficult to see or feel the extent of the saturation of water in building materials without moisture detection equipment used in the water damage industry. What follows is that either the homeowner will attempt to remove the water and simply place household fans around, with or without removing drywall; or they will tell the water damage restoration contractor to leave when the water is extracted and before equipment is placed. The paradox here is that these decisions are made to save time and money. In some cases, they may have done just that. However, in most cases, the resulting long term water damage is both costly and time consuming in addition to being inconvenient and stressful. Added to that is the fact that the cost of mold remediation consequent of an improperly dried flood damage will likely not be covered by insurance policies because the water damage or sewage damage was not dried properly to begin with.
You have probably noticed by now that it is not the water removal service that is the important part of taking care of water damage. It is actually the drying part that makes your home safe from long term mold or building material damage. In fact, there is no time to waste when it comes to drying a water damaged home. Mold begins to start growing within 24 hours and continues “growing like a weed” damaging building materials as it spreads.
Water damage restoration companies spend a tremendous amount of money on drying equipment for a very good reason. They dry quickly, effectively, and safely. After all, think about it, if we could just use household fans and a couple of blowers, we would save a tremendous amount of money on equipment. If I thought those types of equipment did an effective job, I would be all over saving money by purchasing those at less than $50 each rather than a $300-400 blower and $3000 dehumidifiers. However, I know the importance of having industrial equipment to keep your home safe and dry. Further, all of the equipment works together to both dry the structural materials (blowers), remove the moisture from the air as the wet materials dry and the water from them turns to vapor (dehumidifiers), and clean the air to prevent allergens that permeate through the air during drying (air scrubbers).